Description
Niotech Transformers supplies single-phase, oil-immersed pole-mounted transformers for overhead distribution. Units can also be arranged as base-mounted or platform-mounted, confirmed per project.
The standard configuration is single-phase, aluminum windings, Type I mineral oil, ONAN cooling, 65°C average winding temperature rise, 60 Hz, and ±2 × 2.5% full-capacity taps, in a sealed tank. Basic impulse level (BIL) follows the primary voltage class. Other arrangements are available as options, confirmed per project.
Other primary voltages are available — contact us. Larger units (250 kVA and 333 kVA) are heavier; pole and crossarm capacity should be confirmed for the installation. Final ratings, accessories, lead time, and warranty are confirmed per project and stated in the written quotation.
Options
Available options, quoted on request and confirmed per project. Tell us what the installation requires when you request a quotation.
- Copper windings
- Natural ester insulating fluid
- Other primary or secondary voltages
- Base or platform mounting
- Special paint or enclosure finish
Specifications
The table reflects the capacities and voltages offered in the selector above, together with the standard construction. Other primary voltages are available — contact us. Final ratings are confirmed on the approval drawings for each order.
| Type | Single-phase pole-mounted, oil-immersed |
|---|---|
| Capacity | 25 kVA, 37.5 kVA, 50 kVA, 75 kVA, 100 kVA, 167 kVA, 250 kVA, 333 kVA |
| Primary voltage | 12.47 kV GrdY/7.2 kV; 13.8 kV GrdY/7.97 kV; 24.94 kV GrdY/14.4 kV; 34.5 kV GrdY/19.92 kV. Other primary voltages available — contact us. |
| Secondary voltage | 120/240 V; 240/480 V; 277 V; 480 V |
| Frequency | 60 Hz |
| Cooling | ONAN |
| Temperature rise | 65°C average winding rise |
| Windings (standard) | Aluminum |
| Insulating fluid (standard) | Type I mineral oil |
| Taps (standard) | ±2 × 2.5% full-capacity |
| Tank | Sealed tank |
| BIL | By primary voltage class — typically 95 kV BIL (15 kV class), 125 kV BIL (25 kV class), and 150 kV BIL (35 kV class); confirmed per project |
| Efficiency | Designed to DOE 2016 efficiency levels where applicable |
| Mounting | Pole-mounted as standard. Confirm pole and crossarm capacity for 250 kVA and 333 kVA units. Base or platform mounting available, confirmed per project. |
| Certification | Certification requirements confirmed per project |
| Lead time | Confirmed per project |
| Warranty | Confirmed per project |
Frequently asked questions
What does the starting price represent?
The starting price is a reference figure for the selected capacity and voltages in the standard configuration. Request a quotation for a firm price on your project.
What if my combination does not show a starting price?
Some capacity and voltage combinations are quoted individually. Select your configuration and use Contact Us for a Quote — or email us with the rating you need.
Can you supply a voltage that is not in the dropdown?
Yes. Other primary and secondary voltages are available. Contact us with the rating you need, and we will reply with a written quotation.
Do 250 kVA and 333 kVA units need special mounting consideration?
These sizes are heavier than the smaller ratings. Pole and crossarm capacity should be confirmed for the installation. Base-mounted or platform-mounted arrangements can also be quoted, confirmed per project.
Can the unit be supplied with a different winding material or insulating fluid?
Yes. Copper windings, natural ester fluid, and the other options listed on this page are available, quoted on request and confirmed per project.
What are the lead time and warranty?
Lead time and warranty are confirmed per project and stated in the written quotation.
How should I request a quotation?
Use the button above to send the selected capacity and voltages, or email [email protected] with your specification, drawings, or nameplate data.
Ready to specify this transformer?
Send the selected capacity and voltages — or your drawings — and we will reply with a written quotation.